RN-21
- Class 1 Bluetooth Module
- Part#: RN-21
The RN-21 Bluetooth module is perfect for embedded applications where the Bluetooth radio must be located within a chassis. The small form factor and external antenna allow the RN-21 to fit into many diverse applications. The straightforward hardware interface, castellated pads, and complete software stack makes it easy and reliable to design into your end product.
The RN-21 provides a low power, high performance Bluetooth module that supports multiple protocols, including Enhanced Data Rate (EDR). The RN-21 is the solution for developers needing to add wireless capability to their product, but cannot afford to spend significant time and money developing Bluetooth specific hardware.
- Supports Bluetooth 2.1/2.0/1.2/1.1
- Class 1, up to 15dB (100 meters)
- Bluetooth v2.0+EDR support
- Postage stamp sized module, 15.4mm x 22mm x 1.85mm
- UART (SPP or HCI) and USB (HCI only) data connection interfaces
- Sustained SPP data rates - 240Kbps (slave), 300Kbps (master)
- HCI data rates - 1.5Mbps sustained, 3.0Mbps burst in HCI mode
- HCI mode, or SPP/DUN software stacks
- Embedded Bluetooth stack profiles (requires no host stack): includes GAP, SDP, RFCOMM, and L2CAP protocols, with SPP and DUN profile support
- Secure and robust link, FHSS, 128 bit encryption, error correction and guaranteed packet delivery
- Built-in software stack for auto-discovery, auto-connect, and instant cable modes
|
- Cable replacement
- Asset tracking
- Measurement/Monitoring
- Barcode scanners
- Industrial sensors & controls
- Medical devices
- RN-41: Class 1 Bluetooth module with on-board antenna
- RN-51: Bluetooth 2.1 EDR Audio Module
- RN-SMA-4: High performance 4" antenna
|
