RN-USB-X
- FirePlug Bluetooth USB Adapter
- Part#: RN-USB-X
Our latest and greatest adapter, the FirePlug solves the problem plaguing complicated and error filled standard Bluetooth dongles.
Unlike other Bluetooth USB adapters which load bulky Bluetooth drivers and require operating system support, the FirePlug natively supports SPP (Serial Port) or DUN (Dial Up networking) Bluetooth profiles.
FirePlug utilizes the latest FTDI chip for USB to serial conversion. Microsoft-certified serial interface drivers are installed automatically over the network. Once detected, the user can configure and control the FirePlug using a simple ASCII command API over the COM port to configure the Blueooth radio functionality. No GUI or API drivers into the Bluetooth stack is needed. By using a simple COM port interface, the data connection is more reliable and stable.
- Class 1, high power 100 meter Bluetooth radio for long range communication
- Bluetooth versions 2.0, 1.2, and 1.1 compliant
- Can be set up to wake sleeping PC or MAC when connected by remote Bluetooth device
- Settings can be easily changed with AT commands via serial port and remotely over Bluetooth
- DTR mode allows for connect/disconnect via standard COM port signals
- Programmable Bluetooth interface
- 2 LEDs, transmit/receive data, power/connection status
|
- Cable replacement with FireFly and BluePort XP serial adapters
- Data acquisition with BlueSentry Sensor
- Virtual COM port over Bluetooth
- RN-USB-T: BluePlug Bluetooth 2.0 USB dongle
- RN-41: Bluetooth 2.1 class 1 surface mount module with ceramic on-board antenna
- RN-220XP: BluePort XP Bluetooth adapter with high capacity rechargeable LiPoly battery
|
